Discover Custom RV Solutions

Installation:  Pop out original knob and rotate in COUNTERclockwise direction until it comes out in your hand.     Remove the little rubber O-ring is if is there.

Wind the new knob clockwise onto the shaft.

Do not force it.  Back up a bit and try again if not starting.

Wind until rotation stops and go about 1/4 turn more.  You will not hurt the knobs and they need to be tight to stay on.

• When unpacking the cover note that there is a small (but powerful) little magnet on the side of the handle. You can leave it there temporarily.
• Remove the vent cover/grill from the ceiling by getting your fingers under the edges on opposite sides and pull down.
• Place the cover onto the exterior side of the grill and move the magnet from the side of the handle to the center of the back/interior side of the grill. The magnetic attraction should snap it into place.
• Make a small mark on the cover and on the grill so that you can place them in the same orientation later. This step is not absolutely required, but the magnet positions itself off center so for maximum grip the placement should be kept the same.  The difference is slight.  I am not really sure if it is important or not.
• Take a piece of Duct Tape (or similar) and secure the magnet in place
• Push the grill and cover up into place. You should hear a little click or snap as it fastens back into place.
• To use the fan just turn the cover over and stick it back up. It will probably not travel very well in that position.  It needs to be snugged up to the grill.

Installation instructions for shower head booster

 Take the shower head down from the holder.

 Point the holder so the stem is horizontal.

 Orient the booster so that the depression is to the wall of the shower.  That depression will match with the white ball of the shower head holder.  Orient the slot so it opens away from you.

Place the opening on the stem and using your thumbs push while at the same time wrap your fingers around the holder and stem body for leverage.  It is a tight fit and it will snap in place.  You cannot hurt the booster.

 The slot can stay oriented the way you pushed it.  The only weak orientation is pointing downward.  I do not recommend that.

 If you want to take the booster off, rotate it on the stem so that the opening faces you and use a similar grip from the installation to push it out.

 If you have questions message me on messenger or email roosbob@wybatap.com

 Thank you and happy showering.

Installation instructions for switch protectors

• There are 3 options
  • Hot glue on the protector flat spot and set in place.  This is the best and easiest
  • CA glue.  This is more permanent.
  • Double sided tape in small pieces on the flat spots.

Thank you and happy sleeping without the lights.

Installation instructions for dash prop:

The pieces are labeled TOP so that end is up and outside of the hatch.  The opening at the top points inward to the hatch.  The bottom fits into the hole and sort of "locks" in.

Installation instructions for fridge freezer door holder

 Open both doors the same amount and slide the blue holder in between the dors with the big "knob" piece toward the boday of the fridge.  This is where the magnet it and what holds the doors to the frame.

Gain a comprehensive understanding of how Bob's Knobs stands out in the market. Our comparison guide not only showcases our commitment to quality but also helps you choose the right products to enhance your RV living experience. Discover why our parts are the preferred choice for many RV enthusiasts.

Discover invaluable insights in our sixth PDF file, designed to enhance your RV lifestyle. This guide offers practical tips and creative solutions for optimizing space, ensuring comfort, and maintaining efficiency while on the road. Whether you're a seasoned traveler or new to the RV community, these strategies will help you make the most of your mobile home. Dive into expert advice on organizing your living area, managing resources, and enjoying the freedom of RV living with ease and style.